Header Graphic
NewBold Products
Pinewood Derby
Since 1996
Options Catalog

Here is where you can order extra items for your timers: from software to upgrades, cables and testing older units.

Make sure you have everything you need for your race!

Grand Prix Race Manager Software for pinewood derby®
Grand Prix Race Manager Software for pinewood derby®

GrandPrix Race Manager software from Lisano Enterprises, works with all of our timer products.
 The GPRM Pro Version is $80.

Sample Screenshots:

 

Main Overview Racer Registration Heat Results Reports
Built-In USB interface on TURBO
Built-In USB interface on TURBO

This is a Built-In USB Interface for the TURBO product line only.  Order it as an option to be added to your TURBO.   If your order this, you will then have BOTH the USB and serial port connections on the Timer Module.

$30.00

Additional Bridge Module for TURBO
Additional Bridge Module for TURBO

This is an additional bridge module for the TURBO Finish Line Timer. Use this to add up to two extra lanes to an existing finish line system or to have a spare bridge module on hand.

Note, if you are adding more lanes to your system, you will also need extra IR Emitters for your new two lanes, one extra lane module (the numbers that light up) per each new lane and bridge support brackets to support this extra bridge.  All of these are found in the Turbo Catalog and in the Options Catalog section of our webpage.
 

$30.00

Additional Lane Module for TURBO
Additional Lane Module for TURBO


This is an additional Lane Module for the TURBO Finish Line. Use this when adding an extra lane to an existing system, or purchase one per lane to have double sided viewing.

$30.00

Additional IR Emitters for TURBO Timer

Spare IR Emitters for the TURBO Timer product. Choose cable length of 12" or 24".

$8.00

Bridge Support Brackets (pair)

This is a pair of bridge support brackets that help stabilize the bridge over the finish line.  You must select the correct size (3.25", 3.5", 3.75", 4.0") of your track/finish line as well as the number of lanes you need these supports for. (3-4, 5-6, 7-8 lanes).  Current products are shipped with these already. Those who have older units may need to purchase these for upgrading their product's stability.

$18.00

Extra Starting Switch (Turbo or DTX000) with cable
Extra Starting Switch (Turbo or DTX000) with cable

This is an extra switch for your starting lever and an extra cable that will run from the switch to the timer. The cable's standard length is 40 feet. This switch is used with any of our timers in the DTX000 Product line and also is used to start the TURBO.

If you require the cable to have a different length, you must order the $4.00 charge for each cable length you need to be different than the standard length. You may order these changes in the same section of our catalog, under Optional Items, "Change the length of a cable".

$15.00

Change the length of a cable

You may request to change the length of the cables for either the start switch cable and for each lane's finish sensor cable. The standard lengths are: 40 feet for the start switch and 10 feet for each lane's stop sensor. You need to order 1 $4.00 charge for each cable you wish to have modified. After entering the quantity needed changing, you must enter the exact length you need for each cable in the comments section of this item--to the right on this page. Note: the length of the Computer Interface Cable can NOT be changed. If you require a different length for this cable, you should try to order it from your local computer store.

$4.00

Additional Finish Line Sensor for Original DTX000
Additional Finish Line Sensor for Original DTX000

Order one each for lanes 4 through 8 if your track has more than 3 lanes. Or if you would like to have some extra sensors as spares. The cable length is 10 feet. This length can be altered if needed, but you must purchase the additional $4.00 charge per each cable you need altered. These charges are also listed in this section under Optional Items. These stop sensors are used only with the DTX000 Product line and are not needed with the TURBO.

$9.00

Testing Fee


This fee is for testing your older timer that is out of warranty.  You may order this once given permission from us via email to support@newboldproducts.com or phone.  Then you ship your unit back to us and order this $35 testing fee.  We will test the unit  and repair if necessary.

$35.00

 

©2022, NewBold Products    newboldproducts@gmail.com