DerbyMaster Software for Pinewood Derby DerbyMaster software from Enterprising Ideas, works with the DT1000, DT2000, DT8000 and the TURBO. $50.00
	Grand Prix Race Manager Software for pinewood derby GrandPrix Race Manager software from Lisano Enterprises, works with the DT1000, DT2000, DT8000 and the TURBO. Sample Screenshots: $60.00
	DerbyTV for Pinewood Derby Allows you to view the results of the timer unit on a TV screen without requiring a computer interface. Great for groups with access to a large TV. (This item includes an AC adapter so you do not have to order it separately.) This product can be used with both the TURBO and the DTX000 timer product line. $59.00
	Computer Interface Cable for Pinewood derby® timers This a cable you can use to connect the timer to your computer. It's a DB9 male to DB9 female serial port cable. This cable is 3 meters long (9.84 feet). The length of this cable can NOT be changed. This cable can be used with any of our timers, including the TURBO. $10.00
	USB to RS-232 Adapter This adapter allows our timers to connect to your desktop or notebook PC through the USB port if the standard serial port is not available on your PC. This adapter comes with a 3 year warranty, installation CD (driver) and instructions. $28.00
	Built-In USB interface on TURBO This is a Built-In USB Interface for the TURBO product line only.  Order it as an option to be added to your TURBO.  It comes with a 10 ft USB cable that you will be able to hook up directly between your computer's USB port and the TURBO.  If your order this, you will then have BOTH the USB and serial port connections on the Timer Module. $28.00
	Additional Bridge Module for TURBO This is an additional bridge module for the TURBO Finish Line Timer. Use this to add up to two extra lanes to an existing finish line system or to have a spare bridge module on hand. Note, if you are adding more lanes to your system, you will also need extra IR Emitters for your new two lanes, one extra lane module (the numbers that light up) per each new lane and bridge support brackets to support this extra bridge.  All of these are found in the Turbo Catalog and in the Options Catalog section of our webpage.   $25.00
	Additional Lane Module for TURBO This is an additional Lane Module for the TURBO Finish Line. Use this when adding an extra lane to an existing system, or purchase one per lane to have double sided viewing. $25.00
	Additional IR Emitters for TURBO Timer Spare IR Emitters for the TURBO Timer product. Choose cable length of 12" or 24". $8.00
	Bridge Support Brackets (pair) This is a pair of bridge support brackets that help stabilize the bridge over the finish line.  You must select the correct size (3.25", 3.5", 3.75", 4.0") of your track/finish line as well as the number of lanes you need these supports for. (3-4, 5-6, 7-8 lanes).  Current products are shipped with these already. Those who have older units may need to purchase these for upgrading their product's stability. $17.00
	Extra Starting Switch (Turbo or DTX000) with cable This is an extra switch for your starting lever and an extra cable that will run from the switch to the timer. The cable's standard length is 40 feet. This switch is used with any of our timers in the DTX000 Product line and also is used to start the TURBO. If you require the cable to have a different length, you must order the $2.00 charge for each cable length you need to be different than the standard length. You may order these changes in the same section of our catalog, under Optional Items, "Change the length of a cable". $10.00
	Change the length of a cable You may request to change the length of the cables for either the start switch cable and for each lane's finish sensor cable. The standard lengths are: 40 feet for the start switch and 10 feet for each lane's stop sensor. You need to order 1 $2.00 charge for each cable you wish to have modified. After entering the quantity needed changing, you must enter the exact length you need for each cable in the comments section of this item. This section will come up after you click on the order button. Note: the length of the Computer Interface Cable can NOT be changed. If you require a different length for this cable, you should try to order it from your local computer store. $3.00
	Custom Carrying Case for Original Timer, DTX000 Our custom black carrying case holds all your timer equipment for the original DTX000 product line. You can put the timer, sensors, cables, cable ties, manual, and AC adapter into this case. The top level holds the timer. The top piece of foam lifts out and underneath is the lower level. The lower level holds all of your sensors, cable wraps, computer cable, etc. $36.00
	Custom Carrying Case for Turbo Timer Our custom black carrying case holds all your timer equipment for the Turbo Timer product line, for systems up to 4 lanes. You can put the timer module, lane module, emitters, cables, cable ties, manual, and AC adapter into this case. $45.00
	AC Adapter for Original DTX000 Timers This is a 9 volt AC Adapter for any of the DTX000 timers. (The TURBO finish line includes its own adapter.) $10.00
	Additional Finish Line Sensor for Original DTX000 Order one each for lanes 4 through 8 if your track has more than 3 lanes. Or if you would like to have some extra sensors as spares. The cable length is 10 feet. This length can be altered if needed, but you must purchase the additional $2.00 charge per each cable you need altered. These charges are also listed in this section under Optional Items. These stop sensors are used only with the DTX000 Product line and are not needed with the TURBO. $9.00
	DT8000 Chip Upgrade Upgrade your DT8000 to the latest chip module. For those who have older versions of the DT8000. (Must have approval from our support department.) $15.00
	DT1000 to DT2000 Upgrade Kit This kit allows you to upgrade a DT1000 (purchased after Sept 1, 1999) to a DT2000. This will give you the ability to now time 2 lanes. It includes the DT2000 chip, removal tool, labels, manual, and installation instructions.   $30.00
	DT1000 to DT8000 Upgrade Kit This kit allows you to upgrade a DT1000 (purchased after Sept 1, 1999) to a DT8000. This will give you the ability to time from 1 to 8 lanes. It includes the DT8000 chip, removal tool, labels, manual, and installation instructions. $80.00
	DT2000 to DT8000 Upgrade Kit This kit allows you to upgrade a DT2000 to a DT8000. This will give you the ability to time from 1 to 8 lanes. It includes the DT8000 chip, removal tool, labels, manual, and installation instructions. $50.00